VIATERRA LEH - 100% WATERPROOF SADDLEBAGS
The updated 100% Waterproof Leh carries forward the classic saddlebag system along with increased volume and improvements that make it the perfect luggage partner for all motorcycles especially with straight exhausts like Royal Enfields, Triumph Bonneville etc. The Leh saddlebags can also be used for bikes with up-swept exhausts with a saddle rack making sure it’s away from the exhausts and its outlet. The bags come with a pair of inner liners and external rain covers. Using the MOLLE loop system, you can choose to add on a 2/3 person camping tent, a sleeping bag or the POD 12L/ POD 22L expanders to better organize & separate out your stuff.
WHAT COMES WITH THE PRODUCT
- Roll top saddlebags – 1 set (L+R)
- Seam sealed inner liners – 1 set (L+R)
- External raincovers - 1 set (L+R)
PRODUCT SPECIFICATIONS
Built to last:
- Triple stitch on all joints for improved strength
- Bar tacked at all stress points for added reinforcement
- Tough, tear-resistant polyester webbing used all through
- Nylon thread for all stitching as it has a higher strength to linear density ratio (Tenacity) than polyester thread.
Functional:
- 100% seam sealed inner liner constructed from Rip-Stop fabric rated for 5000mm water pressure
- External Raincover constructed from a single fabric piece for superior waterproofing
- Soft plush interior lining in gray color for better visibility of packed items
Original & authentic materials:
- Heavy duty YKK™ (the world's best!) is used across our range - pullers, sliders & tape - for extra durability and smooth operation on all zips. You can check the underside of the slider for the embossed “YKK” logo.
- We use genuine 3M™ Scotchlite™, a pioneer in retroreflective technology based tapes that helps improve visibility under low light conditions so that your safety is enhanced.
- ISO certified fittings manufactured from virgin plastics rather than recycled plastics for optimized & long lasting performance
True zero-displacement fit using a 3 Point anchoring system making it a breeze to load and unload.
- One strap goes under the tail lamp (to prevent the bag from sliding forward)
- Two straps loop through the rear footpeg stays (to secure the bag in place)
Dual side locking on bridge strap for adjusting the width of the bridge. To adjust the webbing length as per the mounting requirements for your specific bike model
- First, secure the double D-Ring and mark the webbing after 4-5 inches
- Cut the rest of the extra webbing - Burn the edges of the cut part of the webbing to stop it from fraying off.
Double sided grab handles for ease of carrying and mounting/ unmounting
Capacity: ~70 liters
Weight: 2.2 kg
Fabrics:
- 1200D fabric exterior with eva for long lasting performance
- 300D x 300D rip-stop fabric with PU/WR coating
- 70D x 70D inner lining with PVC coating
Liners: 68D x 68D inner gray liner fabric rated for 5000mm water pressure
Zippers & Pullers: Only genuine YKK™ sliders and zipper tape is used in all our products. You can check the underside of the slider for the embossed “YKK” logo.
Original 3M Reflectives: We use genuine 3M™ Scotchlite™ retro-reflective tapes (reflects light back to source with minimum scattering) that helps improve visibility under low light conditions so that your safety is enhanced.
Fittings: We source these from certified ISO vendors who manufacture from virgin plastics rather than recycled plastics for optimized performance.
Webbing: Tough, tear-resistant polyester webbing used all through
Thread: We use Nylon-6 thread in our products – this is much stronger than polyester thread.
Please follow the below steps to make your bags last for a long time!
1. Remove bags from the bike when not in use to avoid fabric fading
2. Wipe clean with a damp cloth using mild soap & water
3. Do not use any fabric stain removers, bleach or any chemicals for cleaning.
4. If there are stains which you are not able to remove using a damp cloth, use a soft bristled brush soaked in a mild pH neutral soap and rinse off using cold water. Please note that using the brush could lead to piling which will not be covered under warranty.
5. Allow to air dry thoroughly before storing in a shaded area
6. Store away from the sun & other heat sources
7. Dry-cleaning or machine washing or using a clothes dryers or hand/dhobi washing or soaking will void the warranty as this will damage the special coatings that the fabric has.
8. Do not alter the product or get it repaired at an unauthorized repair centre as this will void the warranty.
9. When you are storing the bag, please do not fold, or roll or otherwise stuff the item into a smaller space/container as this will damage the coating and void the warranty.
Long edge: 41 cm
Wide edge: 21 cm
Height: 35 cm
WARRANTY, RETURN, EXCHANGE & REPAIR PER MANUFACTURER'S POLICY
